embarrassing
way that they do not!)
Regards
John Allen
W.London, UK
From: Kunde, Brian [mailto:brian_ku...@lecotc.com]
Sent: 06 May 2015 17:09
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Wire Questions
Didnt I hear there was some kind of agreement where UL/CSA approved
: John Allen [mailto:john_e_al...@blueyonder.co.uk]
Sent: Tuesday, May 05, 2015 2:09 PM
To: Kunde, Brian
Cc: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: [PSES] Wire Questions
Brian
Grounding Conductor size
An interesting question with respect to internal grounding conductors, and one
which made me
@LISTSERV.IEEE.ORG
Subject: [PSES] Wire Questions
We manufacture a product that is intended for both the US and Canadian markets
in addition to the European community. Our wiring is currently UL/CSA and
harmonized. Looking at the various wire vendors there are UL/CSA CE
certifications
In message
blupr01mb147cbf5b34eed2c0c72b6f594...@blupr01mb147.prod.exchangelabs.com
, dated Tue, 5 May 2015, Rick Busche rick.bus...@qnergy.com writes:
We manufacture a product that is intended for both the US and Canadian
markets in addition to the European community. Our wiring is currently
We manufacture a product that is intended for both the US and Canadian markets
in addition to the European community. Our wiring is currently UL/CSA and
harmonized. Looking at the various wire vendors there are UL/CSA CE
certifications and certifications that are UL/CSA, CE and Harmonized.
From: Kunde, Brian [mailto:brian_ku...@lecotc.com]
Sent: 05 May 2015 16:37
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Wire Questions
Rick,
Are you talking strictly about power cordage or internal hookup wire?
We had a CSA inspector reject one of our products because
(NFPA70),
and CEC Part II (CSA C22.2 No 0-M9).
Brian
From: John Allen [mailto:john_e_al...@blueyonder.co.uk]
Sent: Tuesday, May 05, 2015 11:09 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Wire Questions
Brian
Grounding Conductor size
An interesting question with respect to internal
]
Sent: 05 May 2015 19:40
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Wire Questions
CSA-C22.2 No 0.4 (Bonding of Electrical Equipment) has this
3.4.3.2
The fault capacity of a bond shall be adequate if the bond complies with one of
the following
requirements:
(a) the bond is made from
8 matches
Mail list logo