Re: ITE for industrial locations

National Instruments Kim Boll Jensen Sent by: owner-emc-p...@majordomo.ieee.org 12/04/2001 02:11 PM Please respond to Kim Boll Jensen To: "Bailey, Jeff" , EMC-PSTC cc: Subject: Re: ITE for industrial locations Hi Jeff and all There are an

Re: ITE for industrial locations

001 09:38 AM Please respond to "Bailey, Jeff" To: "'\"EMC-Group\"'" cc: Subject:ITE for industrial locations Hello group, I am in the process of defining a test plan for a product that fits nicely into the definition of I

RE: ITE for industrial locations

Thank you all for your on and off-line responses. They will surely help me make the "most correct" choices. Best regards, Jeff Bailey Compliance Engineering SST - A Division of Woodhead Canada Phone: (519) 725 5136 ext. 363 Fax: (519) 725 1515 email: jbai...@mysst.com

Re: ITE for industrial locations

I read in !emc-pstc that Bailey, Jeff wrote (in ) about 'ITE for industrial locations', on Tue, 4 Dec 2001: >I am in the process of defining a test plan for a product that fits nicely >into the definition of ITE as stated in >3.1 of EN55022:1998 and therefore into EN5502

RE: ITE for industrial locations

from there. If you are hanging these from power lines etc, you might also want to consider heavy industrial. Gary -Original Message- From: Bailey, Jeff [mailto:jbai...@mysst.com] Sent: Tuesday, December 04, 2001 7:39 AM To: '"EMC-Group"' Subject: ITE for industrial

Re: ITE for industrial locations

Hi Jeff and all There are another issue here. When you say industrial could it also be light industrial ? Remember that Industrial in EU is sites with it's own transformer at the mains. If you are sure that your product is only Industrial just put a statement in the manual that the CE marking

RE: ITE for industrial locations

esday, December 04, 2001 4:39 PM >>To: '"EMC-Group"' >>Subject: ITE for industrial locations >> >> >> >>Hello group, >> >>I am in the process of defining a test plan for a product that fits nicely >>into the definition of ITE a

ITE for industrial locations

Jeff" com> cc: (bcc: Robert E. Heller/US-Corporate/3M/US) Subject: ITE for industrial locations

ITE for industrial locations

Hello group, I am in the process of defining a test plan for a product that fits nicely into the definition of ITE as stated in 3.1 of EN55022:1998 and therefore into EN55024:1998 as well. My issue is that although it is obviously ITE (Industrial network communication hardware) it is also design