In a message dated 9/18/2003, Dan Roman writes:
Assuming your talking about 60950 and the signal lines are SELV you only need
basic insulation, not reinforced, between TNV-3 and SELV. Distance through
insulation does not come into play, just the dielectric test and voltage
rating of the wire i
From: owner-emc-p...@majordomo.ieee.org
[mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of Alex McNeil
Sent: Thursday, September 18, 2003 3:04 AM
To: emc-p...@majordomo.ieee.org
Subject: PSTN + Signal Cable
Hi Colleagues,
Does anyone foresee a problem if I route the PSTN and Signal
Tel: +44 (01245) 453616
Fax: +44 (01245) 453410
E-mail: neil.bar...@e2vtechnologies.com
From: Alex McNeil [mailto:alex.mcn...@ingenicofortronic.com]
Sent: 18 September 2003 08:04
To: emc-p...@majordomo.ieee.org
Subject: PSTN + Signal Cable
Hi Colleagues,
Does anyone foresee a problem if I
Hi Colleagues,
Does anyone foresee a problem if I route the PSTN and Signal wires within the
same cable?
I am thinking of a particular application where the above scenario would fit
well in my design. I ensure that the 1.6mm (and 2.0mm for re-inforced
insulation) spacing requirement is met on t
4 matches
Mail list logo