Since Cenelec usually adopt IEC standards and in this case I would ask the "source" within the technical committee in IEC. IEC61326 is covered by IEC/SC65A/WG4. They have to know what's going on ....
Try this one http://www.iec.ch/cgi-bin/procgi.pl/www/iecwww.p?wwwlang=E&wwwprog=dirwg.p&c tnum=478 Convenor: Dipl.-Ing. Anton KOHLING Siemens AG A&D GT6 PO box 3220 DE - 91050 ERLANGEN GERMANY Tel: +49 (9131) 73 14 53 Fax: +49 (9131) 72 50 07 E-mail: anton.kohl...@erl6.siemens.de Hope this helps. Amund -----Opprinnelig melding----- Fra: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]På vegne av Chris Maxwell Sendt: 23. april 2002 19:24 Til: EMC-PSTC Internet Forum Emne: Signal Line Emissions with Respect to EN 61326-1 Hi all, Recently, I have read quite a few threads regarding EN 55022 (European Emissions Limits for ITE equipment) and its newer requirements to measure signal line conducted emissions along with the typical power line conducted emissions. This caused me to go back and look at EN 61326-1:1998 (European EMC specs for Lab, Test and Measurement equipment) According to my copy of EN 61326-1, conducted emissions limits are only specified for "AC Mains". So apparantly, test and measurement equipment hasn't had this requirement placed upon it....yet. Does anybody know of any in-process amendments to EN 61326-1 that would add signal line conducted emissions? If so, is there any expectation of when the amendment is due to be processed? Thanks, Chris Maxwell | Design Engineer - Optical Division email chris.maxw...@nettest.com | dir +1 315 266 5128 | fax +1 315 797 8024 NetTest | 6 Rhoads Drive, Utica, NY 13502 | USA web www.nettest.com | tel +1 315 797 4449 | ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"