To: 'Ilan Cohen'; 'Ken Javor'; emc-p...@majordomo.ieee.org
Subject: RE: metallic coatings
Related to the question ...UL 746C sub-clause 47 specifies testing for
adhesion of metallized coatings for EMC purposes. They reference test
criteria in
ASTMD 3359..If you are submitting to UL and you
know of any similar requirements for adhesion testing for Europe??
From: Ilan Cohen [mailto:ico...@itl.co.il]
Sent: Monday, October 20, 2003 1:53 PM
To: 'Ken Javor'; emc-p...@majordomo.ieee.org
Subject: RE: metallic coatings
Hi Ken
From a safety point of view I typically recommend
:03 AM
To: emc-p...@majordomo.ieee.org
Subject: metallic coatings
Does anyone have any suggestions for a metallic coating that can be
deposited on the interior of a plastic box that would need to meet military
environmental conditions? Suggestions for other metallization techniques
are also
-Original Message-
From: Ken Javor [ mailto:ken.ja...@emccompliance.com]
Sent: Thursday, October 16, 2003 7:03 PM
To: emc-p...@majordomo.ieee.org
Subject: metallic coatings
Does anyone have any suggestions for a metallic coating that can be
deposited on the interior
I've heard of these polymer matrices before and wondered how
they would perform, not only for EMC, but for safety as
well. It's important to remember that using such a polymer
may have consequences in the safety arena:
* may require a connection to protective earth, if there is
a risk
To: 'Ken Javor' mailto:ken.ja...@emccompliance.com ;
emc-p...@majordomo.ieee.org
Sent: Thursday, October 16, 2003 8:37 PM
Subject: RE: metallic coatings
Hi Ken:
Conductive coatings are tricky, and I generally try to avoid them. It
can be difficult to get good electrical connections
...@randolph-telecom.com
http://www.randolph-telecom.com
-Original Message-
From: owner-emc-p...@majordomo.ieee.org
[mailto:owner-emc-p...@majordomo.ieee.org] On Behalf Of Ken Javor
Sent: Thursday, October 16, 2003 10:03 PM
To: emc-p...@majordomo.ieee.org
Subject: metallic coatings
-telecom.com
http://www.randolph-telecom.com
-Original Message-
From: owner-emc-p...@majordomo.ieee.org
[mailto:owner-emc-p...@majordomo.ieee.org] On Behalf Of Ken Javor
Sent: Thursday, October 16, 2003 10:03 PM
To: emc-p...@majordomo.ieee.org
Subject: metallic coatings
Does
Does anyone have any suggestions for a metallic coating that can be
deposited on the interior of a plastic box that would need to meet military
environmental conditions? Suggestions for other metallization techniques
are also welcome.
Thank you.
This message is from the IEEE EMC Society
9 matches
Mail list logo