From: peter.tar...@sanmina-sci.com [mailto:peter.tar...@sanmina-sci.com] Sent: Saturday, May 24, 2003 6:00 AM To: emc-p...@majordomo.ieee.org Subject: UK in-service continuing compliance testing (was: RE: Safety testing after equipment repair)
All - As a matter of curiosity, are there any records of drop-out rates (for equipment that was required to be removed from service)? Short of that, any anecdotes? Are the pass/fail criteria identical to those during type testing? Peter, [R_Hughes >] I have no records regarding failure rates, anecdotal or otherwise. [R_Hughes >] As I you will see from my earlier reply, the tests and hence pass/fail criteria are not necessarily the same as those applied for type testing. Why do I say "not necessarily "? Because the Electricity at Work Regulations are secondary legislation and not standards and are written as such, hence these regulations do not of themselves proscribe the exact tests to be performed. If a company wanted to apply exactly the same tests on a routine basis and they do under type test conditions then there are no explicit requirements that I can recall in the Electricity at Work Regulations that would prevent him/her from doing so {although I must say that it's a while since I looked at it in detail, so if you want to be certain I suggest you look for yourself). Richard - You say, "former piece of UK legislation." As in, "passed into law," or, "passed away." [R_Hughes >] If you look at the whole paragraph you will see that the previous sentence mentioned two laws. Hence the word "former" referred to the first of the two references. Both the Health and Safety at Work etc. Act and the Electricity at Work Regulations are in force today. Regards, Richard Regards, Peter L. Tarver, PE Product Safety Manager Sanmina-SCI Homologation Services San Jose, CA peter.tar...@sanmina-sci.com > From: Richard Hughes > Sent: Thursday, May 22, 2003 5:15 PM > > Rich, Gregg, > > The referenced > document is "The Electricity at Work Regulations > 1989" and they were > implemented as a Statutory Instrument under the > "Health and Safety at Work > etc. Act 1973". The former piece of UK > legislation has kept many a UK > electrician in gainful employment over the years. > It is also why, if you > come to the UK, you often see paper labels saying > 'tested for safety' or the > like on mains powered products. > This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc <http://www.ieeecommunities.org/emc-pstc> This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc