Where is Touchoff data stored?
Jack Ensor
-
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
With the Emc2 stock setup using the Axis GUI, the startup file is
axis.ngc. Where is the startup file designated so that I may designate
something else?
Jack Ensor
-
This SF.net email is sponsored by: Splunk Inc.
Still
Ok, I've got EMC2 running on a dedacated computer and at this point I just want
to
make a stepper spin. This is to learn to set up EMC.
I have an old 5 1/4 floppy drive that has what looks like a stepper motor on it
to
move the head. It has six wires coming out of the body of the motor. So
On Monday 03 September 2007, Jack Ensor wrote:
With the Emc2 stock setup using the Axis GUI, the startup file is
axis.ngc. Where is the startup file designated so that I may designate
something else?
Jack Ensor
That's in the ~/emc2/config/method(stepper etc)/*.ini file, Jack
--
Cheers, Gene
On Monday 03 September 2007, John Thornton wrote:
Ok, I've got EMC2 running on a dedacated computer and at this point I just
want to make a stepper spin. This is to learn to set up EMC.
I have an old 5 1/4 floppy drive that has what looks like a stepper motor on
it to move the head. It has six
I did find this link right after I hit the send button...
http://jewel.morgan.edu/~tmalone/dskdrv/dskdrv.html
Any comments are welcome
Thanks
John
-
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log
I don't believe its here, cuz what I see in my ini file (Display
section) is:
###
# Sections for display options
###
[DISPLAY]
#+ Name of
Jack Ensor wrote:
With the Emc2 stock setup using the Axis GUI, the startup file is
axis.ngc. Where is the startup file designated so that I may designate
something else?
Jack Ensor
It appears that the file name is hard-coded into axis.
Just replace that file with the one you want to,
Jack Ensor wrote:
With the Emc2 stock setup using the Axis GUI, the startup file is
axis.ngc. Where is the startup file designated so that I may designate
something else?
Jack Ensor
Oops. I should have looked a little harder. You can set an environment
variable AXIS_OPEN_FILE to the
Message: 7
Date: Mon, 03 Sep 2007 11:21:38 -0400
From: Gene Heskett [EMAIL PROTECTED]
Subject: Re: [Emc-users] Just Want to Make a Stepper Spin
To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
Message-ID: [EMAIL PROTECTED]
Content-Type: text/plain;
John Thornton wrote:
On the parallel port side if I use the standard_pinout.hal the line
linksp Xstep = parport.0.pin-03-out
Does that refer to the register bit D3 (Data bit 3)on the parallel port?
Parport driver pin numbers correspond directly to the physical pin
numbers on the
I'm trying to grasp the physical wiring connections I need from the
parallel port to the 5 1/4 floppy stepper controller. No problem on the
power it will be from a PC power supply so I have both 5v and 12v.
On the parallel port side if I use the standard_pinout.hal the line
linksp Xstep =
On Mon, Sep 03, 2007 at 10:54:19AM -0400, Jack Ensor wrote:
Where is Touchoff data stored?
In the rs274 parameters set aside for this purpose.
http://linuxcnc.org/docs/2.1/html/gcode/main/#sub:Parameters
axis touch off simply issues a 'G10 L2' command as if in MDI mode.
Jeff
ben lipkowitz wrote:
you'd have to do setp parport.0.pin-03-out-invert TRUE
which changes the way the pin functions. but, there's not really any point
to worrying about the polarity of the step pin anyway, since it will go
through a full pulse every two BASE_PERIODs.
I beg to differ.
14 matches
Mail list logo