The live CD works very well. My thanks again for the help that enabled me
to get the CD working.
I have done file searches trying to find the files used for tkemc so that I
might copy them and try to modify them. I cannot find them. ???
So I figured I would get started by generating a step
In an E-mail received this week from Roland @ Cardinal Engr said there would
be a EMC Meeting Kansas this year. Anyone know any info on this meeting?
thanks
bill hinkle
in Oklahoma
**Need a job? Find an employment agency near you.
(http://yellowpages.aol.com/search?query=employment_
> I've often been tempted to write a C program the does just that and
> leaves all the offsets alone. ;-)
In the emc2 to come (2.3.0), you can start with no varfile and a file with
the proper values will be created.
At least that's how I remember it works ;)
Regards,
Alex
-
On Feb 19, 2009, at 11:56 AM, Jean-Paul Coninx wrote:
>
> Hello,
>
>
>
>
>
> I haave a large millingmachine with large Indramat dc motors
> (permananet magnets) with tacho.
>
> Is it possible to use emc2 for this kind of motors ( tacho is a
> analog signal) ???
>
>
>
> kindly regards
>
> jp
On Feb 19, 2009, at 9:36 AM, Jon Elson wrote:
> Stuart Stevenson wrote:
>> Gentlemen,
>>For a few days I have been chasing a problem with the B axis
>> overtraveling to -360 degrees when I change from manual to mdi.
> I know only a little bit, but one thing I always look for when
> somethin
Hello,
I haave a large millingmachine with large Indramat dc motors (permananet
magnets) with tacho.
Is it possible to use emc2 for this kind of motors ( tacho is a analog signal)
???
kindly regards
jp
_
Laat je vrien
>
> I don't remember changing anything in files other than my files I
> created and use for testing the hydrotel. If no one has any thoughts
> to try I will check out a new trunk and put my files in it to see if
> it runs. Something has changed. I cannot figure out what.
You can always run a "cv
Stuart Stevenson wrote:
> Gentlemen,
>For a few days I have been chasing a problem with the B axis
> overtraveling to -360 degrees when I change from manual to mdi.
I know only a little bit, but one thing I always look for when something
suddenly goes wierd in EMC is some odd value left in the
Gentlemen,
For a few days I have been chasing a problem with the B axis
overtraveling to -360 degrees when I change from manual to mdi. This
started one morning a few days ago. I thought I had made major
progress one evening when I left. The next morning I encountered this
problem. I have been u
On Wednesday 18 February 2009, Jon Elson wrote:
> I recently wanted to check the latency numbers, and ran into this when I
> tried to run latency-test :
>
> ./latency-test: line 136: halrun: command not found
Has been commented on several months ago. A fix requires the setting of PATH
to include
Hello All,
For those who did not get the email from Roland. For a good man, I wish him the
best of luck and much better health in retirment. Joe enjoy your retirment and
take care also.
Thank you Roland
Dale Ertley
CNC-WORKSHOP
NEWS
I’ve been asked by several folks about the 2009 CNC-Workshop.
11 matches
Mail list logo
