On Thu, 2009-09-17 at 22:13 -0600, David Braley wrote:
It's too bad this place isn't a real forum. It would be really cool and
helpful to others (like me for instance) if I could do a complete build
thread from start to finish of retrofitting the Anilam 1100 Sharp over
to an EMC2 controlled
Is it possible to change the Axis display so the cutter arrow shows on
the top of the Z axis instead of below on the toolpath display??
I asked on the IRC channel and CRadek said he didn't see the setting.
It would be a lot more obvious to the operator if the cutter arrow was
on the top
On Fri, Sep 18, 2009 at 11:41:25AM -0400, Dave wrote:
Is it possible to change the Axis display so the cutter arrow shows on
the top of the Z axis instead of below on the toolpath display??
I asked on the IRC channel and CRadek said he didn't see the setting.
It would be a lot more
Oh man. I feel stupid I didn't find these places earlier. Sorry about
that. I saw the poll on the Linuxcnc home page for the idea of a forum.
I had no idea it was already up! Cool!
David
Ray Henry wrote:
On Thu, 2009-09-17 at 22:13 -0600, David Braley wrote:
It's too bad this place
Ray Henry wrote:
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Case_Studies
Thanks Ray! I started to look through the link above. I have got a ton
of reading to do. There is a lot of really great stuff in there!
--
Hi Chris -
You are exactly right. The jog keys also feel backwards.
Thanks,
Dave
Chris Radek wrote:
On Fri, Sep 18, 2009 at 11:41:25AM -0400, Dave wrote:
Is it possible to change the Axis display so the cutter arrow shows on
the top of the Z axis instead of below on the toolpath
Hi all.
I bought a super cheap Logitech gamepad and it works like a charm. But I
have some small problems due to lack of knowledge how to config the hal
file. I also have a very bad Internet connection at the moment so I can't
really search around to find a solution, so I hope you guys can give
First problem:
My gamepad only have one simple joystick, I can only jog two
axis as the wiki examples. I would like to use two buttons to
jog Z instead. These two buttons are true/false signals. Can
I config it some way like this?
When pressing input.0.btn-top2, jog Z down.
When
I'm pretty sure that in classic ladder you can control the Estop
function of EMC - there is an option for creating an Estop logic circuit
in ladder when you choose it via the StepConfig wizard.
I'm still working on the entire ladder/modbus thing myself.
Dave
Frank Tkalcevic wrote:
First
Hello ClassicLadder Developers,
I would like to request that a new feature be added to
ClassicLadder (CL), if it's not too difficult. When you
close EMC and EMC is closing down all the open CL windows
on the way out, it would be nice if CL could pause during
the closedown long enough to
10 matches
Mail list logo