Kirk Wallace wrote:
> There are others on this list much more qualified to comment, but there
> might be a hint that your encoder has some noise. Here is one of my
> HALscopes:
> http://www.wallacecompany.com/cnc_lathe/HNC/emc2/pid_x-1b.png
>
>
His encoder is BOUND to have a lot of positional q
On Mon, 2011-09-26 at 15:50 -0700, Bruce Klawiter wrote:
> I do not have a clue how to tune my servos. I have been reading everything I
> can find on the subject but its like it is written in some alien language
> that I'll never understand.
>
> What I have been doing so far is following this gu
Bruce Klawiter wrote:
> I do not have a clue how to tune my servos. I have been reading everything I
> can find on the subject but its like it is written in some alien language
> that I'll never understand.
>
> What I have been doing so far is following this guide
> http://www.newport.com/servic
I do not have a clue how to tune my servos. I have been reading everything I
can find on the subject but its like it is written in some alien language that
I'll never understand.
What I have been doing so far is following this guide
http://www.newport.com/servicesupport/Tutorials/default.aspx?i
Hi Alan;
If you had some idea of when you needed to sharpen the
tool, you could schedule a tool Change with a M6 Tn. n being
any number other than the current one. Remove the tool sharpen
and reinstall. Use the Tool-Length-probe .ngc, in the .ngc samples,
(with a touch switch) to measures the new
On Sep 26, 2011, at 14:55 , Bruce Klawiter wrote:
> I don't understand the relationship and/or differences between
> DEFAULT/MAX_ACCELERATION in the TRAJ and MAX_ACCELERATION in the AXIS section
> of the ini file
[AXIS_*]MAX_ACCELERATION is the specified axis' max acceleration.
[TRAJ]MAX_ACC
I don't understand the relationship and/or differences between
DEFAULT/MAX_ACCELERATION in the TRAJ and MAX_ACCELERATION in the AXIS section
of the ini file
your help is greatly appreciated,
Bruce
All my config file can be found here:
https://sites.google.com/site/bmklawt/home/emc2