On 11/16/2011 10:31 AM, andy pugh wrote:
> On 16 November 2011 14:23, wrote:
>
>> What if I wanted to make say watch parts
> Are you very wealthy?
>
> http://www.lathes.co.uk/aciera/page5.html
>
Oh, man. Check out that control rack, especially the reel-to-reel tape
(punched paper?) reader at the
Hello,
I am using plasma-sim sample configuration and the only change I made
was to remove 4th axis (A) and all hal staff related to it. I also
replaces gantykins with trivialkins. I have created patch for original
configuration, so that you can use it for testing.
So, what is the problem?
When
Art Fennerty of Mach3 fame used to carry around with him a small 3 axis
machine that might have been 8 inches square overall. I think the
original device was used to work with fiberoptic cables
but he fit a small spindle to it and used it for a 3 axis mill. It was
really small and very preci
kqt4a...@comcast.net wrote:
> I enjoy reading about y'all and your terrawatt spindle motors with bits that
> require a mobile crane to load but what about small
> What if I wanted to make say watch parts
> And I will qualify that by saying a watch for us normal size folks
> And I am sure y'all wit
On 11/16/2011 3:06 AM, Erik Christiansen wrote:
> On 15.11.11 19:30, perotter wrote:
>
>> Some DATRON mills are polymer-concrete. I think they are concrete with
>> a polymer used like rebar would be. I also think that all of the 1st
>> ones were concrete, but some are now granite.These mill are
On 16 November 2011 14:23, wrote:
> What if I wanted to make say watch parts
Are you very wealthy?
http://www.lathes.co.uk/aciera/page5.html
--
atp
The idea that there is no such thing as objective truth is, quite simply, wrong.
--
A friend of mine gave me an RMV ST400 driver board and I was wondering if
anyone has had any experience with them and EMC2.
Chris
--
All the data continuously generated in your IT infrastructure
contains a definitive r
I enjoy reading about y'all and your terrawatt spindle motors with bits that
require a mobile crane to load but what about small
What if I wanted to make say watch parts
And I will qualify that by saying a watch for us normal size folks
And I am sure y'all with deep pockets can come up with links
Andy,
I've asked Les to change it to "GPLv2 or later" just a few minutes ago
and just got a reply back that he contacted you with the go ahead to
change the license.
John
On 11/15/2011 4:40 PM, andy pugh wrote:
> On 13 November 2011 13:10, John Thornton wrote:
>> cradek is the release manager
Andrew wrote:
>If you want to completely control the fingers angle, you can assign another
>axis for them. It might be W if >you already have XYZABC.
>I guess, you should add the axis to your HAL file and genserkins. It
requires no kinematic transformation, >just add the direct
connection.
2011/11/16 Francesca Sca
> I solved the problem with the world mode when I'm using genserkins module.
> The main problems were the latency of my computer and some home setting
> wrong. But now I have another problem. I have set the D-H parameters of my
> robot but unlike Puma my robot has a hand
I solved the problem with the world mode when I'm using genserkins module. The
main problems were the latency of my computer and some home setting wrong. But
now I have another problem. I have set the D-H parameters of my robot but
unlike Puma my robot has a hand and a stepper motor that control
On 15.11.11 19:30, perotter wrote:
> Some DATRON mills are polymer-concrete. I think they are concrete with
> a polymer used like rebar would be. I also think that all of the 1st
> ones were concrete, but some are now granite.These mill are for high
> speed milling.
When I visited ANCA, a couple o
13 matches
Mail list logo
