Hello everybody,
I would like to control the linear ac motor using bldc hal component.
1. I am not sure how should i set the:
bldc.N.scale s32 rw = The number of encoder counts per rotor revolution.
bldc.N.poles s32 rw = The number of motor poles. The encoder scale will be
divided by this
Hi Klemen,
I worked on a similar project last summer. My motor was two
pole. It had four magnets over 100mm length, and three coils
over that length. I used Austria Microsystems AS5311 linear
magnetic encoders, which gave me 512 quadrature counts per
mm. I did not use the index pulse, as it
On Thu, 21 Feb 2013, Klemen Dovrtel wrote:
Date: Thu, 21 Feb 2013 00:12:21 -0800 (PST)
From: Klemen Dovrtel klemen_dovr...@yahoo.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] hal - bldc - linear motor
Hello everybody,
I would like to control the
From a post on hackaday I got the impression OpenSCAD might be just what I
need to generate G-CODE, but I find more information on 3-D printing G-CODE
than routing.
Am I suppose to export my project as a DXF, and then use DXF2GCODE, or is
there another way usually used to get G-CODE for a
openscad is good for creating models, but it won't create gcode.
openscam is great for viewing the output of g-code.
On Thu, Feb 21, 2013 at 10:04 AM, Cogoman cogo...@optimum.net wrote:
From a post on hackaday I got the impression OpenSCAD might be just what
I need to generate G-CODE, but I
On 02/21/2013 10:58 AM, John Murphy wrote:
openscad is good for creating models, but it won't create gcode.
openscam is great for viewing the output of g-code.
On Thu, Feb 21, 2013 at 10:04 AM, Cogoman cogo...@optimum.net wrote:
From a post on hackaday I got the impression OpenSCAD might be
On 02/21/2013 11:41 AM, Sebastian Kuzminsky wrote:
I've used FreeCAD to make drawings for machining before. Export as SVG,
import the SVG into PyCAM, and get gcode out of PyCAM to feed to
LinuxCNC on my mill. That toolchain is not without its wrinkles and
warts, but it can make good parts.
I haven't used openscax, but have had mixed results with PyCAM.
For CAD I've been using SolveSpace with nice results. It's a little limited
(no helical sweeps and can't import geometry) but I is the only stable open
source parametric tool I've found. It can also export G-code, but you still
