i just switched two wires that go from TCHCAD to 7i33 and result is the same
5V - 970.
0V--1220
That is all that i can do
right?
On Sun, Jun 8, 2014 at 9:37 PM, Peter C. Wallace wrote:
> On Sun, 8 Jun 2014, a k wrote:
>
> > Date: Sun, 8 Jun 2014 21:27:59 -0700
> > From: a k
> > Reply-To: "E
On Sun, 8 Jun 2014, a k wrote:
> Date: Sun, 8 Jun 2014 21:27:59 -0700
> From: a k
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Feed control
>
> I would check the input connections (P2)--
> what looks wrong - out
I would check the input connections (P2)--
what looks wrong - out of range?
what number?
what should i look
what is it --(P2)- input voltage from potentiometer?
On Sun, Jun 8, 2014 at 9:15 PM, Peter C. Wallace wrote:
> On Sun, 8 Jun 2014, a k wrote:
>
> > Date: Sun, 8 Jun 2014 21:08:26 -070
On Sun, 8 Jun 2014, a k wrote:
> Date: Sun, 8 Jun 2014 21:08:26 -0700
> From: a k
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Feed control
>
> --Those numbers might be possible if the THCAD input polarity were rever
--Those numbers might be possible if the THCAD input polarity were reversed
does this mean something wrong and need to be change?
is this power in polarity ?
which one? to power on THCAD or power from potentiometer ?
On Sun, Jun 8, 2014 at 12:21 PM, Peter C. Wallace wrote:
> On Sun, 8 Jun 20
---And 0V input gives 1220 for encoder.03.velocity, and 5V input gives 970?
yes
with scale 100.
setp hm2_5i20.0.encoder.03.scale 100
different scale gives different result.
about imagebin.ca
i can turn on camera and you can see all system -computer - wiring and
changing figures etc--- in real tim
On Sun, 8 Jun 2014, andy pugh wrote:
> Date: Sun, 8 Jun 2014 20:06:49 +0100
> From: andy pugh
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Feed control
>
> On 8 June 2014 19:20, a k wrote:
>
>> Yes, i can make 1 V D
On 8 June 2014 19:20, a k wrote:
> Yes, i can make 1 V DC 2 or 3 or 4 or 5 or anything between those figures
> --V DC with potentiometer. Maximum reading of voltage from potentiometer
> is 5 V DC.
And 0V input gives 1220 for encoder.03.velocity, and 5V input gives 970?
Can you make a diagram
let me make correction.
TCHCAD board has two power in terminals.
First --- to make board work.- and i use USB to do that. Voltage
reading between 4.89 to 4.88
Second to input variable Voltage from 0 up to +5V DC. i use for that
cell phone charger and potentiometer.
Yes, i can make 1 V DC 2 or
On 8 June 2014 04:21, a k wrote:
> i did check with voltmeter again voltage on power into TCHCAD and it
> 4.89 to 4.88
> this is from USB power
> is this ok?
Close enough. But does your potentiometer setup also give you 0V?
I am wondering if you have the potentiometer wired up correctly.
Can you
10 matches
Mail list logo
