I was digging through my collection of stuff and my eye set upon a
rotary table with an X/Y integrated into it, with a square plate full of
threaded holes. Doesn't come off, it's built into the table.
Then a thought happened, I could build an addon for my Monarch 12CK
lathe that clamps to the w
Hello,
is there another/newer way to confirm termination of axis and thus
linuxcnc other than putting something in .axisrc ?
I am using this code:
def General_Halt():
text = "Do you really want to close linuxcnc?"
if not root_window.tk.call("nf_dialog", ".error", "Question", text,
"warni
Hello,
the machine that I am currently in the progress of updating to linuxcnc
2.6 is physically setup as a right handed cartesian coordinate system
with the positive X axis pointing to the top and the positive Y axis
pointing left and positive Z axis up.
That means that everytime that I star
On 1/20/2015 8:47 AM, schoone...@btinternet.com wrote:
> Hi John
>
> No, you are right there is something screwy about the Wheezy distro and
> nvidia
>
> I ran the build manually on the 3.4.9-rtai-pae install, after the
> package install using DKMS failed (log attached)
>
> The crucial bit is at
On Wednesday 21 January 2015 07:44:49 Charles Steinkuehler did opine
And Gene did reply:
> On 1/20/2015 8:47 AM, schoone...@btinternet.com wrote:
> > Hi John
> >
> > No, you are right there is something screwy about the Wheezy distro
> > and nvidia
> >
> > I ran the build manually on the 3.4.9-rt
On 1/21/2015 10:16 AM, Gene Heskett wrote:
>
> Charles: Do you have a good link that would guide me in building a recent
> xenomai kernel in amd64 format that would at least run the axis sim?
See the bottom half of this page:
http://xenomai.org/2014/06/building-debian-packages/
...or you may
On Wednesday 21 January 2015 12:11:32 Charles Steinkuehler did opine
And Gene did reply:
> On 1/21/2015 10:16 AM, Gene Heskett wrote:
> > Charles: Do you have a good link that would guide me in building a
> > recent xenomai kernel in amd64 format that would at least run the
> > axis sim?
>
> See