So I've done a little more investigation all without spending any money yet.
The Probotix web site links to the wiki which points to the MachineKit
LinuxCNC for the BBB.
I downloaded the 8GB image and installed it on a MicroSD card. Stuck it in
a Rev B (2GB FLASH) BBB and booted.
It shows up
I did exactly that with a BBB and Xylotex cape, using one of the unused
limit inputs for a single pulse per rev sensor. You might want to follow
the discussion on
https://groups.google.com/forum/#!topic/machinekit/RW_bnXdXzyE
(you'll have to read up to the end).
You need a little familiarity
On 13 August 2015 at 02:35, Chris Morley chrisinnana...@hotmail.com wrote:
He suggested that codes in remap that create queue-busters
can create problems do to some flow control weakness in
tastaskk/interp.
Yes, including M66 in G-code subs.
--
atp
If you can't fix it, you don't own it.
Thanks Robert, and thanks Sam et al for testing
I'll be moving soon and hope to get re-setup and try some of this
TomP tjtr33
On 08/13/2015 07:54 AM, sam sokolik wrote:
As 2.7 gets closer to release I wanted to make some comments on where
the new TP is at. I have been running it through its
As 2.7 gets closer to release I wanted to make some comments on where
the new TP is at. I have been running it through its paces as others
have. Thanks to all that have posted gcode that caused issues. Rob has
been a genius at fixing issues as they come up. A huge thanks to Rob
and Tormach
I've been running 2.7 for a while on my plasma and the difference it
unreal. 2.6 would choke on letters generated with nurbs but 2.7 just
runs at the speed I tell it to for some beautiful cuts.
Thanks
On 8/13/2015 7:54 AM, sam sokolik wrote:
As 2.7 gets closer to release I wanted to make some
Another 2.7 prerelease is out: 2.7.0~pre7. This one fixes several
important bugs, and adds two new features:
* stepconf now is able to convert Mach3 configs to LinuxCNC configs
* add a driver for the Huanyang family of VFDs
There are now no known regressions since 2.6. Please test this one
