Thanks a lot, your insight into code really provides some useful info, such
as the pivot point of rotation in the back plot is hardcoded to (0,0,0).
I'm gonna try adding fake axes V and W in my machine config and set
GEOMETRY = VWAXYZ, apply an offset to V and W axes and see what happens.
As for t
See my website (see signature) for available shop equipment (near
YosimtePark).
--
Kirk Wallace
http://www.wallacecompany.com/machine_shop/
http://www.wallacecompany.com/E45/
--
Check out the vibrant tech community on o
You might want to check out Vismach too. Gremlin and Vismach use the
same OpenGL methods. I'll keep a look out for any info I have on my end
that may add to the conversation.
On 08/27/2017 12:53 AM, 王若溪 wrote:
Thanks a lot, your insight into code really provides some useful info, such
as the p
Hi guys
I am struggeling alot with my lathe X axis. The machine does not hold size
at all. I am using The Leadshine ESM-22430 motor and the DS808 drive. The
Dirsetup is set at 2500, Dirhold 2500, Steplen 5000, Stepspace 5000 and
stepscale at -322. The ballscrew has a 2.5mm pitch and the steps per r
