Edit the PROGRAM_PREFIX line in the configuration .ini file to
your desired directory.
-- Ralph
From: Cowen via Emc-users [emc-users@lists.sourceforge.net]
Sent: Thursday, December 6, 2018 12:00 PM
To: emc-users@lists.sourceforge.net
Cc: Cowen
Subject:
On Fri, 7 Dec 2018 at 00:43, Ken Strauss wrote:
>
> While discussing the tool table I'll ask a question (it is too cold in the
> shop to try it right now). Are all offsets (Z, X, Y) acted upon in a mill?
Yes, all the offsets in the tool-table that have a matching axis are acted on.
--
atp
"A
While discussing the tool table I'll ask a question (it is too cold in the
shop to try it right now). Are all offsets (Z, X, Y) acted upon in a mill?
I'd like to use X/Y in the tool table to position an auxiliary spindle when
a special tool numbers that are in the auxiliary spindle are selected.
On Thursday 06 December 2018 19:18:25 andy pugh wrote:
> On Thu, 6 Dec 2018 at 22:37, Gene Heskett wrote:
> > > How about an entry in the W column of the tool table?
> >
> > Maybe, whats it normally do?
>
> It would be the offset in the W axis. I doubt that you have a W axis,
> so you won't see
On Thu, 6 Dec 2018 at 22:37, Gene Heskett wrote:
> > How about an entry in the W column of the tool table?
>
> Maybe, whats it normally do?
It would be the offset in the W axis. I doubt that you have a W axis,
so you won't see any effect, but the tool changer should be able to
read the value.
On Thursday 06 December 2018 13:57:24 andy pugh wrote:
> On Thu, 6 Dec 2018 at 18:32, Gene Heskett wrote:
> > Thanks for any suggestions I can carve into this when I find my lost
> > round tuit.
>
> How about an entry in the W column of the tool table?
Maybe, whats it normally do?
Thanks Andy.
On 12/6/2018 2:49 PM, andy pugh wrote:
> On Thu, 6 Dec 2018 at 20:03, Cowen via Emc-users
> wrote:
>>
>> It would be great if I could redirect the default "open file" directory to
>> "media." Can anyone point me in the right direction to make this change?
>
> Have a look at
Hello folks, I am using AXIS on two Probotix routers in a high school, and I am
always looking for ways to make things easier for the kids. Easier means less
problems. In that vein, I have a question that Google and messing around in
AXIS have not helped me with!
I try to reduce the number of
On Thu, 6 Dec 2018 at 18:32, Gene Heskett wrote:
> Thanks for any suggestions I can carve into this when I find my lost
> round tuit.
How about an entry in the W column of the tool table?
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of
On Thursday 06 December 2018 13:18:00 Cecil Thomas wrote:
> just testing to see if my new email works.
>
looks like it did, but be aware that your message back to you is
considered a duplicate and nuked by gmail so you usually won't see the
echo as a confirmation that it worked. It is not
Greetings all;
One of the problems I'll have to solve in the future for a tool changer,
is the diff in unlock run time of the ratchet wrench, dependent on
whether the tool is in a TTS like holder, and all thats being changed is
the TTS holder or needs to have the r9 itself changed, For the
just testing to see if my new email works.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
12 matches
Mail list logo