I'm doing a retrofit of a 2001 chevalier with a heidenhain control that
looks very similar to the anilam control. It has a all in one servo unit.
That is dead. From a power strike.. You can get boards from Germany for
them. I'm using chinese servos and drives and a vfd for the spindle. But
I'm
I measured several rotations of the Z-axis lead screw on my Sherline
4400 CNC lathe.
The BACKLASH setting is 0.0035
I started with a move in the + direction that was at least 2x the
backlash clearing I saw earlier.
> G90
and then a sequence of 35
> G1 Z +0.0050 F6
reading the digital dial in
On Saturday 09 November 2019 17:46:51 Todd Zuercher wrote:
> Well, we went to look at the 2001 Chevalier. While the machine looks
> nice, it appears to be brain dead. The Anilam 6400M control shows no
> signs of life.
Making it a great candidate to be inspected for a blown fuse.
> We were tol
Well, we went to look at the 2001 Chevalier. While the machine looks nice, it
appears to be brain dead. The Anilam 6400M control shows no signs of life. We
were told it died after a storm. Unfortunately the servo drives appear to be
tightly integrated with the control probably making it a p
Thank you Andy. I'm going to take a look at that.
El 8 nov. 2019 17:13, "andy pugh" escribió:
> On Fri, 8 Nov 2019 at 18:43, Leonardo Marsaglia
> wrote:
> >
> > if there is any more
> > information or some samples would be great.
>
> A lot of the test suite tests use streamer:
>
> https://gith
Hass seems to have a good service organization and that can be a big
deal if you have a breakdown on a critical machine and can't repair it
yourself.
Dave
On 11/6/2019 10:51 PM, Jon Elson wrote:
On 11/06/2019 12:32 PM, Todd Zuercher wrote:
The seller who is the original owner says that the