> On 28 Nov 2021, at 04:44, John Dammeyer wrote:
>
> And look at creating the flex part from steel since I have gear cutters and
> an arbor.
The ideal profile is not an involute. There is a sketch of it somewhere in the
HD website.
___
Emc
I always end up with the odd ones that have no match. No packaged IC's
on the other side of the board either.
The colors used on this are 3 that are White and one each of Brown, Red,
Yellow, Green and Blue. None have a stripe.
On 11/28/21 02:53, Les Newell wrote:
Take a look at this pdf, page
Take a look at this pdf, page 87
<,https://www.heidenhain.us/wp-content/uploads/349529-2H_Rotary_Encoders_en.pdf>.
If it's an incremental encoder, that's probably the correct pinout.
Les
On 28/11/2021 06:07, Bari wrote:
Found this encoder in a box with the cable snipped off. I haven't
found