This make a good case for dual independent encoders. motor
shaft/ballscrew, ballscrew/glass scale, steps/glass scale, etc.
Just for grins I tried the hand crank on my well used (Boeing then trade
school, the auction) defunct tracer mill converter by a Russian engineer
to cnc for the trade school
On 10/5/22 22:56, Jon Elson wrote:
Wow, it gets deeper!
It is NOT the encoder, or anything in the encoder-reading process.
I marked the motor shaft, and the motor is returning to the exact same
position every cycle.
Well, I tried a different indicator and mount, and the problem was in
the i
The solution to hard problems are always in the peripheral vision.
> On Oct 6, 2022, at 12:20 PM, gene heskett wrote:
>
> On 10/5/22 22:56, Jon Elson wrote:
>> Wow, it gets deeper!
>>
>> It is NOT the encoder, or anything in the encoder-reading process.
>>
>> I marked the motor shaft, and the
A colleague once told me that the harder a bug is to find then the
easier it is to fix. I think there is a lot of truth to that.
John Figie
On Thu, Oct 6, 2022 at 12:44 PM Thaddeus Waldner wrote:
>
> The solution to hard problems are always in the peripheral vision.
>
>
> > On Oct 6, 2022, at 12
On 10/6/22 15:06, John Figie wrote:
A colleague once told me that the harder a bug is to find then the
easier it is to fix. I think there is a lot of truth to that.
John Figie
That is a given John. When a bug is hard to find, you start paying
attention to every byte, and become one
with the cod