Re: [Emc-users] Two machine configurations -> g-code check

Tomaz, I watched the video. Even at .25 speed I could not see the axis movement of the head/head. I would like to see the head/head moving. Do you sometimes run with the A axis rotary table unhooked from the control? On Fri, Apr 26, 2024 at 3:09 PM Tomaz T. wrote: > Machine is 5-axis head-head

Re: [Emc-users] Two machine configurations -> g-code check

I did try your code for M100 (M100 is first line of g-code) but I guess something isn't ok, as there is no message to be seen (at wrong config) and even at matched config, g-code is not executing forward no matter how many times I hit R... > Did you try my M-code? If one PP inserts M100 and the

Re: [Emc-users] Two machine configurations -> g-code check

That is correct, I don't use "B" axis on head/head in case/config where workpiece is rotating so in this config B axis is used for that and head/heads "B" axis is in this case/config as A axis and used only for homing. In g-code A is not programed in any case. If machine is used as classic 5-axi

[Emc-users] Capto

Hi Andy I don't know if you adopted Capto from scratch, or had some already, but as a new tooling system did you consider the Kennametal KM system? See on Ebay

Re: [Emc-users] Two machine configurations -> g-code check

On Sat, 27 Apr 2024 at 16:20, Tomaz T. wrote: > I did try your code for M100 (M100 is first line of g-code) but I guess > something isn't ok, as there is no message to be seen > OK, so this time I have tested it, and it did take a bit of work to make it work. Here is the actual Python code that

Re: [Emc-users] Capto

On Sat, 27 Apr 2024 at 18:04, Roland Jollivet wrote: > > I don't know if you adopted Capto from scratch, or had some already, but as > a new tooling system did you consider the Kennametal KM system? I basically just like Capto (and the fact that it can be connected with a simple bolt is nice to