sorry for the brevity - language barrier
> > axis
> >
> > flag = 0
And what do these two lines do?
line flag = 0
this line should be added to the file /usr/bin/axis (if RIP version -
bin/axis )
=
> it? What does it do? Does it work with external jog buttons?
yes, all
jogaxisget.comp:
// sudo halcompile --install jogaxisget.comp
component jogaxisget "determines which axis jogging";
pin in bit Xin0 "axis.0.kb-jog-active";
pin in bit Xin1;
pin in bit Yin0 "axis.1.kb-jog-active";
pin in bit Yin1;
pin in bit Zin0 "axis.2.kb-jog-active";
pin in bit Zin1;
pin out
thanks Andy
07.05.2021 14:49, andy pugh пишет:
On Fri, 7 May 2021 at 12:27, nkp216 wrote:
addf switchZA.0 servo-thread
...
can a component cause problems for stepper motors - they are jerky
Your switch would need to run in the base-thread to transfer steps
directly.
I am not 100% c
Based on the topic on the forum
https://forum.linuxcnc.org/38-general-linuxcnc-questions/19055-can-linux-cnc-control-twin-turrets
If we need alternate work.
Is it possible to apply such a scheme?
Switch mux-demux allowed only if turretA and turretB in zero position.
(tool_change_position_turretA
I want the interpreter to handle the compensation path, like this:
https://imgur.com/xs9e3BJ
https://imgur.com/Zo5pvHR
I'll try to change for myself convert_straight(),
convert_straight_comp1() , convert_straight_comp2()
Maybe someone similar already did ?
_
I use Clonezilla for this.
Great-great program!
https://clonezilla.org
23.04.2020 06:37, R C пишет:
if the new disk is smaller, unlikely nowadays, you might be able to
shrink it image you created (if you did), effectively
it just truncates the file/iso and leave the empty space out.
On 4/
I tried to make such a feature :
https://imgur.com/fPVBktb
in version 2.7 it works
https://youtu.be/X9R3icekrTY
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
for instance
halui.mode.is−mdi
01.04.2020 21:31, andy pugh пишет:
(Where are you reading the mode?)
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
in this case the mode does not switch:
that is - when you press F5, the mode remains "manual"
01.04.2020 00:42, andy pugh пишет:
So seems deliberate.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/li
--- axis2.7.15.tcl
+++ axis.master.tcl
...
...
...
@@ -804,7 +822,7 @@
$_tabs_manual configure -borderwidth 2
$_tabs_mdi configure -borderwidth 2
-${pane_top}.tabs itemconfigure mdi -raisecmd "[list focus
${_tabs_mdi}.command]; ensure_mdi"
+${pane_top}.tabs itemconfigure mdi -raisecmd "[list f
src/emc/usr_intf/axis/extensions/emcmodule.cc
31.01.2020 21:55, nkp пишет:
linuxcnc.py does not exist ,this module is in C
31.01.2020 21:50, John Dammeyer пишет:
-Original Message-
From: nkp [mailto:nkp...@gmail.com]
it is described here:
http://linuxcnc.org/docs/2.7/html/config
linuxcnc.py does not exist ,this module is in C
31.01.2020 21:50, John Dammeyer пишет:
-Original Message-
From: nkp [mailto:nkp...@gmail.com]
it is described here:
http://linuxcnc.org/docs/2.7/html/config/python-interface.html
That describes the program which is great. However a
it is described here:
http://linuxcnc.org/docs/2.7/html/config/python-interface.html
31.01.2020 21:01, John Dammeyer пишет:
Thanks Gene,
-Original Message-
From: Gene Heskett [mailto:ghesk...@shentel.net]
On Thursday 30 January 2020 23:30:37 John Dammeyer wrote:
I'm trying to figu
Hi!
When the Gcode contains subroutines,
chaotic highlighting of the active line is observed.
(I"m using hal_sourceview.py )
The reason is clear - lcnc highlights the line number from the "main" code ,
when a subroutine is found - jumps to the line (line number) from the
subroutine.
Is there an
there is a small description in the source code:
'compute_screw_comp()' is responsible for calculating backlash and
lead screw error compensation. (Leadscrew error compensation is
a more sophisticated version that includes backlash comp.) It uses
the velocity in emcmotStatus->joint_vel_
it seems to work fine
thanks!!
28.12.2019 21:50, Dewey Garrett пишет:
Try:
RS274NGC]
PARAMETER_FILE = /dev/null
Ref: https://en.wikipedia.org/wiki/Null_device
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.
tried to set:
[RS274NGC]
PARAMETER_FILE = ""
emc creates too files named "" and "".bak
=
tried to set:
[RS274NGC]
PARAMETER_FILE =
emc creates too files named rs274ngc.var and rs274ngc.var.bak
___
Emc-use
is that simple?
=)
Thanks!
28.12.2019 19:36, Gene Heskett пишет:
If you have that file named in your .ini, make it ="".
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
I do not want Lcnc to remember offsets.
28.12.2019 14:11, N пишет:
Have a line in my filename.ini file like the one below, where filename is
whatever name of your configuration files have.
HALFILE = filename.hal
Hello!
Can I somehow disconnect .var file?
Is it possible ?
To replace it:
How to preset pins in component code?
/* sudo halcompile --install example.comp */
component example ;
pin out pinname-##-not = True [32] ;
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc
"I haven't implemented arc blending with more than 3 axes yet. However, the
last big refactor will make it easier to do that in the future. The big
obstacle is that it requires changing how the trajectory planner treats
velocity and arc length internally. Right now, the path progress and
velocity
Are there any examples where the tool is prepared in advance?
Machine : tool changer with swiveling arm.
like this
http://www.electronicsam.com/images/KandT/conversion/toolchangerspindle.JPG
(image taken from the forum)
___
Emc-users mailing list
E
More experiments:
https://www.youtube.com/watch?v=OKCRbs_kcSQ
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
The video shows the principle of visualization of a rotating table.
To do:
to rotate the source contour.
https://youtu.be/Gk50wphVu80
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
I am satisfied with the fact that the coordinate system now moves when
the table is “rotated”.
(This is seen in the video.)
I think it would be logical to turn the axes in sync with the table:
https://www.youtube.com/watch?v=Qfj021uKGq4&feature=youtu.be
I suspect that static workpiece and mov
I think it would be logical to turn the axes in sync with the table:
https://www.youtube.com/watch?v=Qfj021uKGq4&feature=youtu.be
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Thanks Andy for the push in the right direction!)
I almost got what I wanted.
OpenGLTk.py:
rotation_vectors = [(1.,0.,0.), (0., 1., 0.)]
rotates around Y axis
(but rotates around Z axis( require - around Y)
___
Emc-users mailing list
Emc-use
https://www.mail-archive.com/emc-developers@lists.sourceforge.net/msg17937.html
ps
Vismach in some tasks was limited:
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Thanks!
But now required Axis.
ps
Vismach in some tasks was limited:
https://www.mail-archive.com/emc-developers@lists.sourceforge.net/msg17936.html
but VisMach is pretty easy to visualize the placement
___
Emc-users mailing list
Emc-users@list
retrofitting big_machine (17t) (EMC2_control)
What are you trying to do?
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
if in glnav.py (function set_view_p)
edit :
self.lat = 0
self.lon = 0
p_view - normal
(but rotates around Z axis( require - around Y)
You can change the views here:
https://github.com/LinuxCNC/linuxcnc/blob/master/lib/python/glnav.py#L395
Now it looks like this:
https://imgur.com/gallery/cW2PQbO
Isn't that view identical to the top-down view of a conventional mill?
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
If the axes are positioned in this way:
https://imgur.com/gallery/gqfFde0
the perception of the trajectory will be better.(IMHO)
What would change? Are you wanting to add the radial axis?
___
Emc-users mailing list
Emc-users@lists.sourceforge.ne
here is my function g711:
https://github.com/nkp2169/G71/blob/master/remap.py#L23
if H int - it works
if H float - no
what am I doing wrong?
13.03.2016 12:48, Michael Haberler пишет:
>> Am 13.03.2016 um 09:21 schrieb nkp :
>>
>> What does this error mean?
>> http
What does this error mean?
https://picasaweb.google.com/107033522069386867580/132016#6261445564700413634
P.S.
If not used float H :
https://picasaweb.google.com/107033522069386867580/132016#6261445543825452002
--
Transf
35 matches
Mail list logo
