Hello, We want to do some experiments using the Motenc-Lite card with the EMC2_2.3.1 software. The graphical interface we are using is TKEMC.
The problem we are facing is as follows: 1. Start emc and select "montec" in My Configurations file folder. 2. Clear the “E-STOP” condition and turn the machine on (by pressing F1 then F2). 3. When press “Home” button, an error message " Can't do that (EMC_AXIS_HOME) in auto mode with the interpreter idle" occurs. If we skip the third step above, then the problem occurs as follows: 1. Start emc and select "montec" in My Configurations file folder. 2. Clear the “E-STOP” condition and turn the machine on (by pressing F1 then F2). 3. Load the file "cds.ngc". 4. Put the stock to be milled on the table. 5. Set the proper offsets for each axis by jogging, an error message "can't do that (EMC_AXIS_JOG) in auto mode with the interpreter idle" occurs. If we skip the fifth step above, then the problem occurs as follows: 1. Start emc and select "montec" in My Configurations file folder. 2. Clear the “E-STOP” condition and turn the machine on (by pressing F1 then F2). 3. Load the file "cds.ngc". 4. Put the stock to be milled on the table. 5. Run the program, and an error message "Linear move on line 14 would exceed limits" occurs. May anyone help us to solve the above problem please? Thank you, Schlieffen Wang Engineer Accupower Techonlogies email: schlief...@163.com ------------------------------------------------------------------------------ ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
