On Wed, Feb 8, 2012 at 7:04 AM, Viesturs LÄcis
viesturs.la...@gmail.comwrote:
2012/2/8 Erik Christiansen dva...@internode.on.net:
Experiments with new grammars are only to see if there are benefits to
_some_ users in having a more explicit input syntax, which is then
converted to
2011/4/1 Stephen Wille Padnos spad...@sover.net:
It's probably not the interpreter that needs improvement, actually. HAL
can handle as many actuators as you want (subject to some execution time
limits that nobody has come close to yet). One could easily write a
very very simple motion
On Mar 31, 2011, at 10:46 PM, Stephen Wille Padnos wrote:
That's precisely what EMC does when you use isolcpus on the kernel boot
command line. In any case, I believe the EMC RT processes all bind to
the highest CPU number (so if you have a 4-core, isolcpus should be 3).
The documentation I
On 16 November 2010 17:07, Jon Elson el...@pico-systems.com wrote:
Heh heh! Take THAT, you Mach3 wannabees! You still can't do serial
kinematics!
And it only took half a dozen of the most experienced EMC
integrators/developers several days to do it too :-)
Well, truth be told, most of
spad...@sover.net wrote:
You can simulate index using a timer on the A channel. A goes to input,
output is Z (and goes to the encoder component). There are HAL
components
called timedelay and debounce which might be useful for this. Set
the
timeout to something longer than the short
Hi Andy, Steve and Dave
Thanks for the replies, I see from the initials that you (Andy) are the
person who posted this solution in the first place.
I didn't realise that the last line had wrapped, the spindle-index-enable
line isn't wrapped normally, must have happened when pasting into the
Gentlemen,
Look at this website - http://witshow.org/
Is there any interest in preparing a machine or three for this show?
There would be a need for machine preparation. There would be a
need for booth population.
Provided there is enough interest I will provide the booth at the
On Thu, 28 May 2009, Terry wrote:
Date: Thu, 28 May 2009 20:17:23 -0700
From: Terry tjm...@cableone.net
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] Mesa-Hm2
Hi,
As I was looking through the SVST8_4IM2.pin file I saw
that the connections for P2 are almost the same but P3
Steven demonstrated a working ModBus spindle control running from EMC2
to an AutomationDirect VFD at fest this last summer. We didn't try
anything like threading but it did forward, reverse, and speed. I'm
only guessing but I don't think the code got into the repository yet as
it was pretty
Unfortunately, something went wrong with internet access at the workshop,
so we've been without for most of the past 2 days. I'm at the hotel now,
which is the only reason I can post this :)
I don't know whether we'll have access tomorrow, so commits and IRC
participation may be spotty.
- Steve
10 matches
Mail list logo