Jack,
Take a look at the left hand pane on under news on the linuxcnc.org
website. There is a link for:-
Ubuntu 10.04&EMC2 Live CD
Cheers,
Steve
Sent from my iPhone
On 27 Oct 2010, at 21:56, Jack Coats wrote:
> I would like to use BitTorrent to download the lated bootable CD.
> When
> loo
Jon thanks for your reply!
I was using the Pluto-step firmware not the servo firmware so no
encoders are in use.
Additionaly there were no motors connected just the Pluto-p connected
directly to the para port (no cable extention).
The odd thing is when enabling only two axis such as xy or xz
Thanks Andy. Now why couldn't I find that when I was searching ;-)
On Fri, Oct 15, 2010 at 4:28 PM, Andy Pugh wrote:
> On 15 October 2010 16:15, srgpip wrote:
> >
> > Dam it's so annoying!
> > Is there a way I can change my email address in the settings for
Dam it's so annoying!
Is there a way I can change my email address in the settings for the group?
Cheers,
Steve
On Fri, Oct 15, 2010 at 4:07 PM, Andy Pugh wrote:
> On 15 October 2010 16:00, srgpip wrote:
>
> > On another note with regards to the maillist it seems I do
with my head wrapped in this problem which could have been
avoided ;-) Though it has taught me more about EMC than I would have learnt
otherwise, so thats not such a bad thing :-)
Cheers,
Steve
On Fri, Oct 15, 2010 at 4:00 PM, srgpip wrote:
> Thanks for the replys Guys! :-)
> That would e
Thanks for the replys Guys! :-)
That would explain things.
I was using the debug print commands and when moving the Y axis with 3 axis
enabled I was getting a different number return on PPDATA then I was with
the Z and X which were the same.
Z, X returned 64511 and so did Y positive move.
Y negati
