Chris Morley wrote:
> Only the setp lines with substitution variables need be in the first HAL
> file. eg.
>
> setp ppmc.0.encoder.00.scale [AXIS_0]INPUT_SCALE
>
> Those pins should be present after loading the ppmc component no?
>
Yes, and the file xxx_load.hal loads the hal components. Then,
> WOW, this is an amazing discovery! I have had my config broken up into
> a bunch
> of hal fines for years. First, there's an xxx_load.hal file that does
> the loadrt and addf
> commands, then I have 2 hal files to connect up all the motion, pid and
> interface
> stuff (I've been working on
Chris Morley wrote:
> It seems that the calibration program will only check the first HAL file
> described in the INI file. which is ppmc_load.hal.
> while the values for substitution are in ppmc_motion.hal
>
> if you move the setp ppmc.0.encoder.00.scale [AXIS_0]INPUT_SCALE
> etc into the ppmc_lo
properly.
I can't test that cause I don't have a ppmc product.
Let me know if that works...sorry the answer took so long.
Chris M
From: d...@archfitters.com
To: emc-users@lists.sourceforge.net
Date: Mon, 18 Jun 2012 17:33:44 -0700
Subject: Re: [Emc-users] [FWD: RE: Live Config]
He
: Live Config]
Here are the config files..Thanks
Original Message
Subject: Re: [Emc-users] [FWD: RE: Live Config]
From: Chris Morley
Date: Tue, June 12, 2012 11:12 pm
To: EMC
well there also has to be a substitution entry in the ini file
in the Hal file it would look
...@archfitters.com
To: emc-users@lists.sourceforge.net
Date: Mon, 11 Jun 2012 06:58:33 -0700
Subject: Re: [Emc-users] [FWD: RE: Live Config]
Thanks for responding. I must admit my question was extremely poorly
written. Sorry for the poor grammar and bad descriptions. I checked the
hal files as mentioned
