Hello!
Is it possible to control 6 steppers with a single 7i76? There are 5
step/dir outputs, and I guess that IO pins are not meant for high step
rate...
The drives need TTL input, not differential. I could try to connect them
directly to 5i25. Is there a firmware to support this (on a single
On 9 December 2013 11:54, Andrew pkm...@gmail.com wrote:
Is it possible to control 6 steppers with a single 7i76? There are 5
step/dir outputs, and I guess that IO pins are not meant for high step
rate...
The IO pins are serial addressed, in the servo thread.
The drives need TTL input, not
2013/12/9 andy pugh
bodge...@gmail.comhttps://mail.google.com/mail/u/0/?view=cmfs=1tf=1to=bodge...@gmail.com
There are ttl-level stepgens on the second port (the header on the
5i25) with the 2x7i76 firmware.
Really. Thanks!
First I'll try to use 6 software stepgens via parport. If too slow
