On Fri, 19 Feb 2010, Belli Button wrote:
> Date: Fri, 19 Feb 2010 09:12:55 +0200
> From: Belli Button
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] 5I20 Stepper motors and enco
Andy Pugh wrote:
> On 19 February 2010 07:12, Belli Button wrote:
>
>> How can I
>> get axis to display the desired positon and the encoder position?
>>
>
> I don't know. But does it actually gain you much? If the numbers are
> different you need to stop
>
You can use a pyvcp panel
On 19 February 2010 07:12, Belli Button wrote:
>
> Here's a question for those in the know. I have a 5I20 that I intend to use
> for driving step/dir signals for my stepper motors. I would like to add
> encoders to the steppers so that I can measure if I have lost any steps at
> some point. Que
Hello,
Here's a question for those in the know. I have a 5I20 that I intend to use
for driving step/dir signals for my stepper motors. I would like to add
encoders to the steppers so that I can measure if I have lost any steps at
some point. Question is, do I need the 7I33 for encoder inputs
