2013/12/9 andy pugh
https://mail.google.com/mail/u/0/?view=cm&fs=1&tf=1&to=bodge...@gmail.com>
>
> There are ttl-level stepgens on the second port (the header on the
> 5i25) with the 2x7i76 firmware.
>
> Really. Thanks!
First I'll try to use 6 software stepgens via parport. If too slow or jerky
I
On 9 December 2013 11:54, Andrew wrote:
> Is it possible to control 6 steppers with a single 7i76? There are 5
> step/dir outputs, and I guess that IO pins are not meant for high step
> rate...
The IO pins are serial addressed, in the servo thread.
> The drives need TTL input, not differential.
Hello!
Is it possible to control 6 steppers with a single 7i76? There are 5
step/dir outputs, and I guess that IO pins are not meant for high step
rate...
The drives need TTL input, not differential. I could try to connect them
directly to 5i25. Is there a firmware to support this (on a single
con
