Thank you gentlemen . That was my oversight.
sam sokolik wrote:
> In the display setting of the ini file you can use the GEOMETRY setting
> to make axis backplot correct for your machine.
>
> http://www.linuxcnc.org/docs/2.3/html/config_ini_config.html#sub:%5BDISPLAY%5D-section
>
> GEOMETRY =
In the display setting of the ini file you can use the GEOMETRY setting
to make axis backplot correct for your machine.
http://www.linuxcnc.org/docs/2.3/html/config_ini_config.html#sub:%5BDISPLAY%5D-section
GEOMETRY = XYZABCUVW
Controls the preview and backplot of rotary motion. This item
On Wednesday 08 July 2009, Andy Pugh wrote:
>2009/7/8 Jim Wilkin :
>> Just got my a axis going and noticed that the Axis plot screen doesn't
>> show the A axis.
>
>I noticed the same thing, but decided it was probably deliberate, as I
>can't imagine how you would show the A axis movement without kn
2009/7/8 Jim Wilkin :
> Just got my a axis going and noticed that the Axis plot screen doesn't
> show the A axis.
I noticed the same thing, but decided it was probably deliberate, as I
can't imagine how you would show the A axis movement without knowing
the absolute position and direction of the
Have been running emc2 for about two years.
Upgraded to latest live cd .
My setup uses stepper xyza .
Just got my a axis going and noticed that the Axis plot screen doesn't
show the A axis.
Is this normal or have I overlooked something ?
Keep up the good work and thanks for everything.
