That s00 does catch us all once in a while. Fortunately the S word is
modal so you don't have to repeat it each time you use the M word.
Rayh
On Sat, 2007-12-01 at 16:46 -0800, Mark Jackson wrote:
> Yeah...someone suggested that. It worked. I am just using it to
> activate an air cylinder t
Yeah...someone suggested that. It worked. I am just using it to activate an
air cylinder that drops a spindle down on a 2-1/2 axis machine so any value
after the "S" works. I didn't realize that "no value" doesn't do squat.
-MJ
Emory Smith <[EMAIL PROTECTED]> wrote: I had the same problem.
I had the same problem.
I tried adding the speed control (S100) to the M# command and it works for
me.
Thanks!
On Nov 5, 2007 1:03 PM, Mark Jackson <[EMAIL PROTECTED]> wrote:
> Hi...I have just started working with EMC2. I reconfigued the Hal to
> control the spindle with pin 16.
>
> I can contro
Bingo!
Thanks for the help you guys.
MJ
Chris Radek <[EMAIL PROTECTED]> wrote: On Mon, Nov 05, 2007 at 11:03:42AM
-0800, Mark Jackson wrote:
> Hi...I have just started working with EMC2. I reconfigued the Hal to control
> the spindle with pin 16.
>
> I can control the steppers just fine
On Mon, Nov 05, 2007 at 11:03:42AM -0800, Mark Jackson wrote:
> Hi...I have just started working with EMC2. I reconfigued the Hal to control
> the spindle with pin 16.
>
> I can control the steppers just fine but the spindle doesn't respond via the
> m3 commands. I AM however able to contr
Have you tried setting the spindle speed also? M3S100
sam
- Original Message -
From: Mark Jackson
To: emc-users@lists.sourceforge.net
Sent: Monday, November 05, 2007 01:03 PM
Subject: [Emc-users] Can't control spindle with M3 command
Hi...I have just started working
Hi...I have just started working with EMC2. I reconfigued the Hal to control
the spindle with pin 16.
I can control the steppers just fine but the spindle doesn't respond via the
m3 commands. I AM however able to control the spindle from the manual controls.
Please can anyone tell me wh
