On Sunday 01 November 2020 20:28:00 Andy Pugh wrote:
> > On 1 Nov 2020, at 22:53, Gene Heskett wrote:
> >
> > So what does the L option do?
>
> It allows you to repeat the cycle.
>
> Described in the canned cycle intro.
>
> http://linuxcnc.org/docs/2.8/html/gcode/g-code.html#gcode:g80-g89
And is
> On 1 Nov 2020, at 22:53, Gene Heskett wrote:
>
> So what does the L option do?
It allows you to repeat the cycle.
Described in the canned cycle intro.
http://linuxcnc.org/docs/2.8/html/gcode/g-code.html#gcode:g80-g89
___
Emc-users mailing list
Greetings all doc writers;
Needing to use the G83 peck drilling cycle today since I was drilling a
4.3mm hole clear thru a 1" thick slab of alu, I looked it up but found a
puzzle, and it worked without using the L option, which I could not find
even in the prior pages that were referenced.
So