regards,
Greg
From: Colin Kingsbury ckingsb...@gmail.com
To: emc-users@lists.sourceforge.net
Sent: Thu, September 30, 2010 11:58:02 AM
Subject: Re: [Emc-users] Encoder as MPG over serial?
I'm starting up a blog at http://ckcnc.wordpress.com to document what I'm
I'm starting up a blog at http://ckcnc.wordpress.com to document what I'm
working on. There's nothing much there yet but there will be more over the
next couple weeks. I've got all the pieces working, what I need to do know
is tighten everything up. I'm designing a board that will have two
For anyone who was curious, I figured this out last night and it turned out
to be a lot easier than I thought. Basically, all I needed to do was use the
MPG howto from the wiki (
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Hooking_Up_A_MPG_Pendant), and
instead of mapping the encoder inputs to the
From: Colin Kingsbury ckingsb...@gmail.com
To: emc-users@lists.sourceforge.net
Sent: Wed, September 29, 2010 11:12:22 AM
Subject: Re: [Emc-users] Encoder as MPG over serial?
For anyone who was curious, I figured this out last night and it turned out
to be a lot easier than I
So, thanks to an assist from Jeff Epler and Chris Radek, I've gotten my
Arduino-HAL interface more or less fully functional with both inputs and
outputs. My purpose for this is to build a human-machine interface (read:
control panel for my mill). So far I've gotten it to turn input pins in
HALUI
