hey guys,
when i start EMC in sim mode ,AXIS GUI ,in MDI mode,I enter some code(G1
x6 Y7 F5),then let it running,before it finish,I switch to Manual mode (press
F3),then a error msg display:
"can't do that (EMC_TRAJ_SET_TELEOP_ENABLE) in auto mode with the interpreter
idle"
is this a bug in axis?
when i start EMC in mini GUI and do the same thing,there is no such error
msg! and i also try it in xemc GUI,still no such error msg. so, is this a bug
in axis?
you can test it in this way:
1.start EMC in sim mode ,AXIS GUI
2.toggle Emergency Stop (press F1)
3.toggle Machine Power (press F2)
4.switch in MDI (press F5)
5.enter some g code (G1 X6 Y7 F6) and run it
6.press F3 switch to Manual mode.
then you mey see the err msg
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users