Gentlemen,
With the capability of the EMC2 control it is possible to remove
the requirement for G17/G18/G19 and/or the G17.1/G18.1/G19.1. The
control is able to use the tool axis vector to allow circle
interpolation and drill cycles at whatever the current tool axis
vector is.
This has probably been addressed but I thought I would mention it
in this forum.
thanks
Stuart
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
