I use an Automation Direct GS2 VFD on my Series 1 BP. LinuxCNC has a
component to control the GS2 via modbus.
JT
On 6/18/2013 12:39 AM, Don Stanley wrote:
1- Has anyone used a VFD to control the spindle speed via the G code?
2- Does anyone know a source for the lubriplate #107 recommended on
On Tue, Jun 18, 2013 at 12:39 AM, Don Stanley dstanley1...@gmail.comwrote:
1- Has anyone used a VFD to control the spindle speed via the G code?
Does the VFD accept analog input?
2- Does anyone know a source for the lubriplate #107 recommended on the
units service placard? Or an compatible
Don Stanley wrote:
1- Has anyone used a VFD to control the spindle speed via the G code?
Works fine for me using a Toshiba VFD controlled from a Pico Systems setup.
2- Does anyone know a source for the lubriplate #107 recommended on the
units service placard? Or an compatible
On Tue, 18 Jun 2013 01:39:03 -0400, you wrote:
1- Has anyone used a VFD to control the spindle speed via the G code?
Yes - I use a Telemecanique ATV21HU30N4 3Kw flux vector drive on the
lathe. Works with analogue voltage input or modbus. I'm using analogue
with a simple breakout board and
1- Has anyone used a VFD to control the spindle speed via the G code?
2- Does anyone know a source for the lubriplate #107 recommended on the
units service placard? Or an compatible alternative?
Thanks
Don
