Pncconf gives a message that a PDM frequency of 6000 is required and
puts that into the HAL file. Should it not be 6x10^6?
Rudy
Its definately supposed to be 600 Hz so this is a pncconf bug (Is this
the latest pncconf?)
Peter Wallace
Mesa Electronics
Yes it came with Linuxcnc 2.5.2
From: r...@asmsa.co.za
To: emc-users@lists.sourceforge.net
Date: Thu, 2 May 2013 08:06:10 +0200
Subject: Re: [Emc-users] Hostmot2-PDM Frequency
Pncconf gives a message that a PDM frequency of 6000 is required and
puts that into the HAL file. Should it not be 6x10^6?
Rudy
There seems to be some misunderstanding regarding the PDM frequency for a
7i33. The Integrators manual, V2.5, p140 states that the frequency is in Hz.
The 7i33 manual recommends 6 MHz.
Pncconf gives a message that a PDM frequency of 6000 is required and puts
that into the HAL file. Should it not
On Mon, 29 Apr 2013, Rudy du Preez wrote:
Date: Mon, 29 Apr 2013 09:17:40 +0200
From: Rudy du Preez r...@asmsa.co.za
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Hostmot2-PDM frequency