Tom wrote:
> Thank you Jon
> Yes, from searching the forum for "spindle restart" threads I gathered
> basically
> the same conclusion.
> I didn't mean to poke around in an old wound...
> I will look into beta testing ver. 2.3 and maybe have a go at it.
>
Oh, I DON'T mind! This has been just
Jon Elson writes:
snip...
> >
> Yup, this is a current problem in EMC2. There is a way to set EMC to
> not turn off the spindle and coolant on mode changes. But, actually, in
> most cases you DO want it to turn them off, it is only in the "start
> from line" case that you want them turned
Hi Jon,
I did this years ago. It is really pretty easy as the emc docs lay
out modal G codes pretty well. It really isn't too many lines of code.
Unfortunately, I cannot find the source and at one time it was in the
dropbox but could be retrieved today only if someone happened to
find an old
Tom wrote:
> Hi all,
>
> In an earlier post I commented on pausing Emc2/Axis in the middle of a cut in
> order to clear swarf and the problem of using the "stop" button which turns
> off
> the spindle and coolant: how to "set next line" and resume where you left off
> when the spindle and coolant
John Thornton writes:
>
> I've searched the manuals and I can't find it :(
> all though I seem to remember some talk about it not long ago...
>
Hi John,
Thanks for looking.
I recall that Alex Joni referred to this ini statement in an earlier post about
this issue. I tried to follow up on thi
I've searched the manuals and I can't find it :(
all though I seem to remember some talk about it not long ago...
John
On 4 Feb 2009 at 3:32, Tom wrote:
> Hi all,
>
> In an earlier post I commented on pausing Emc2/Axis in the middle of
> a cut in
> order to clear swarf and the problem of using
Hi all,
In an earlier post I commented on pausing Emc2/Axis in the middle of a cut in
order to clear swarf and the problem of using the "stop" button which turns off
the spindle and coolant: how to "set next line" and resume where you left off
when the spindle and coolant are off? Alex J. replied