- Original Message -
From: "Alex Joni" <[EMAIL PROTECTED]>
To: "Enhanced Machine Controller (EMC)"
Sent: Monday, June 11, 2007 4:37 PM
Subject: Re: [Emc-users] Lathe Spindle, Mesa Help!
>> I would like to
>> use the 3rd or 4th Mesa encoder input
> This was a Anilam LatheMate with a dead Crusader M L controller. The X
> and Y had 625 ppr encoders and 5mm pitch ball screws, giving me 12700
> counts per inch. I'm not sure how many counts the spindle encoder has
> until I get it connected and read a few revolutions. I would like to
> use th
- Original Message -
From: "Peter C. Wallace" <[EMAIL PROTECTED]>
To: "Enhanced Machine Controller (EMC)"
Sent: Monday, June 11, 2007 1:10 PM
Subject: Re: [Emc-users] Lathe Spindle, Mesa Help!
>
> What is the maximum count rate of the encoder? This wi
On Mon, 11 Jun 2007, RogerN wrote:
> Date: Mon, 11 Jun 2007 12:46:17 -0500
> From: RogerN <[EMAIL PROTECTED]>
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] Lathe Spindle, Mesa Help!
>
&g
I have my X and Z axis working and my spindle drive is on the way. I
need to connect the spindle encoder so I can cut threads. I don't know
if I need to connected to the Mesa encoder inputs, general purpose
inputs, parallel port or what. On the Pluto-lathe configuration, it's
connected the p
