On 29 December 2015 at 06:53, Paul Lacatus wrote:
> Please indicate me where can I find a procedure to transfer the setting for
> my MF 70 from my old Linux CNC with 2.6 . I have found some paragraphs about
> and I have understood that is not a copy only procedure. Some more details ?
It shoul
Yes, the memory is tight , it is using a small amount in swap, I will upgrade
to 1GB soon.
Please indicate me where can I find a procedure to transfer the setting for my
MF 70 from my old Linux CNC with 2.6 . I have found some paragraphs about and I
have understood that is not a copy only pro
On 28 December 2015 at 18:24, Paul Lacatus wrote:
> On the latency test I got 49900 no jitter on servo thread and 25000ns on base
> thread. The test was done on heavy load , top was showing around 9 on 5
> minutes.
>
> It is usable ?
It should be OK as far as latency is concerned. Memory might
I have upgraded memory to 512MB replaced the 1GB cf card with a 16 GB card and
installed linuxcnc 2.7.3 . On the latency test I got 49900 no jitter on servo
thread and 25000ns on base thread. The test was done on heavy load , top was
showing around 9 on 5 minutes.
It is usable ? How can I tran
> On 7 dec. 2015, at 18:27, andy pugh wrote:
>
> On 7 December 2015 at 14:22, Paul Lacatus (Personal)
> wrote:
>> Right now the computer is a tower PC with a celeron 900MHz that is bigger
>> than the MF70
>
>
> An alternative to this if the disparate sizes of the machine and the
> controll
On 7 December 2015 at 14:22, Paul Lacatus (Personal)
wrote:
> Right now the computer is a tower PC with a celeron 900MHz that is bigger
> than the MF70
An alternative to this if the disparate sizes of the machine and the
controller are a problem, might be one of the VESA mount mini-ITX
computer
On 12/07/2015 08:22 AM, Paul Lacatus (Personal) wrote:
> Hi everybody,
>
> I am using for some time Linux CNC on a small proxxon MF70
> for small PCB or small faceplate . Right now the computer
> is a tower PC with a celeron 900MHz that is bigger than
> the MF70. I found a thin client computer
On 7 December 2015 at 14:22, Paul Lacatus (Personal)
wrote:
> I found a thin client computer from Fujitsu
> Siemens Futro S400 that has the 1GB CF card ( the "hard drive") defective
> and my ideea is to use it for linuxcnc computer. One solution is to use a
> bigger card of 8 GB for installing
