rs@lists.sourceforge.net"
> > Subject: Re: [Emc-users] Mesa 7i90
> > as remote sserial
> >
> > Am I once again trying for something untested?
> > Is it possible to use a 7i90hd as a high speed
> > sserial remote (2.5Mb, not the 115kb) with
> > con
On Fri, 29 Oct 2021 at 04:40, Ralph Stirling
wrote:
>
> Am I once again trying for something untested?
> Is it possible to use a 7i90hd as a high speed
> sserial remote (2.5Mb, not the 115kb) with
> configurations other than straight gpio?
From the LinuxCNC side, if it works as a sserial device a
On Fri, 29 Oct 2021, Ralph Stirling wrote:
Date: Fri, 29 Oct 2021 03:18:40 +
From: Ralph Stirling
Reply-To: "Enhanced Machine Controller (EMC)"
To: "emc-users@lists.sourceforge.net"
Subject: Re: [Emc-users] Mesa 7i90 as remote sserial
Am I once again trying fo
Am I once again trying for something untested?
Is it possible to use a 7i90hd as a high speed
sserial remote (2.5Mb, not the 115kb) with
configurations other than straight gpio?
Thanks,
-- Ralph
From: Ralph Stirling
Sent: Sunday, October 24, 2021 11:11 AM
T
On Sunday 24 October 2021 14:11:09 Ralph Stirling wrote:
> I'm interested in using the 7i90hd as an sserial remote, but am having
> trouble pulling all the pieces together to build a configuration. I
> will ultimately need four servo channels (encoder and pwm), three MPG
> channels, and a bunch o
I'm interested in using the 7i90hd as an sserial remote, but am having trouble
pulling all the pieces together to build a configuration. I will ultimately
need four servo channels (encoder and pwm), three MPG channels, and a bunch of
discrete i/o. I may split this up into two or three 7i90 ssr
