Jon;
I stumbled into the solution, responses below.
On Sat, Nov 27, 2010 at 12:39 AM, Jon Elson el...@pico-systems.com wrote:
Don Stanley wrote:
Hi Jon and All;
My configuration is:
-D510MO computer
-Ubuntu 10.04 Live Disk
-EMC2 2.4.5
-USC with univstep reconfigured for mill.
Don Stanley wrote:
When the OUTPUT_SCALE is set to +1.0 I was getting 1 step output for
each inch of travel. That was actually .04 inches of movement for
1 inch movement shown on the axis display. My drives need 125000 steps
per inch of travel (25 steps on the knee). When I set the
Hi Jon;
Responses and questions below:
On Sat, Nov 27, 2010 at 12:39 AM, Jon Elson el...@pico-systems.com wrote:
Don Stanley wrote:
Hi Jon and All;
My configuration is:
-D510MO computer
-Ubuntu 10.04 Live Disk
-EMC2 2.4.5
-USC with univstep reconfigured for mill.
The USC works
Don Stanley wrote:
The 5-8 switches are up (ON) for servo and non servo. My micro stepping
Drivers only need more steps with direction to do the micro step moves.
Sorry, you are right. These switches operate opposite of what they
should, switch ON means
function OFF in many cases, and I
Hi Jon and All;
My configuration is:
-D510MO computer
-Ubuntu 10.04 Live Disk
-EMC2 2.4.5
-USC with univstep reconfigured for mill.
The USC works fine in non servo mode, (Switches down).
When I switch to servo (switches up) none of the three servo axis
will move.
I have tracked (WATCH) the PID
On Fri, 2010-11-26 at 17:36 -0500, Don Stanley wrote:
Hi Jon and All;
My configuration is:
-D510MO computer
-Ubuntu 10.04 Live Disk
-EMC2 2.4.5
-USC with univstep reconfigured for mill.
The USC works fine in non servo mode, (Switches down).
When I switch to servo (switches up) none of
On Fri, Nov 26, 2010 at 7:29 PM, Kirk Wallace
kwall...@wallacecompany.comwrote:
On Fri, 2010-11-26 at 17:36 -0500, Don Stanley wrote:
Hi Jon and All;
My configuration is:
-D510MO computer
-Ubuntu 10.04 Live Disk
-EMC2 2.4.5
-USC with univstep reconfigured for mill.
The USC works
Don Stanley wrote:
Hi Jon and All;
My configuration is:
-D510MO computer
-Ubuntu 10.04 Live Disk
-EMC2 2.4.5
-USC with univstep reconfigured for mill.
The USC works fine in non servo mode, (Switches down).
When I switch to servo (switches up) none of the three servo axis
will move.