On Wednesday 25 April 2018 09:55:15 andy pugh wrote:
> On 25 April 2018 at 14:32, Gene Heskett wrote:
> > 5/8" wide might need some grinding of the edge as I recall the ends
> > are tapered on at least one end. Will the grinding lead to early
> > fatigue cracks?
>
> How many magazines full do you
On 25 April 2018 at 14:32, Gene Heskett wrote:
> 5/8" wide might need some grinding of the edge as I recall the ends are
> tapered on at least one end. Will the grinding lead to early fatigue
> cracks?
How many magazines full do you expect to get through?
--
atp
"A motorcycle is a bicycle with
On Wednesday 25 April 2018 06:33:52 andy pugh wrote:
> On 25 April 2018 at 00:53, Gene Heskett wrote:
> > This is a flat leaf, bent in the shape of a W. S/B nominally 1/2 to
> > 5/8" wide, folded at 3 places around a 3/32 drill shank. What spec
> > of steel do I need? and how do I heat treat it t
On 25 April 2018 at 00:53, Gene Heskett wrote:
> This is a flat leaf, bent in the shape of a W. S/B nominally 1/2 to 5/8"
> wide, folded at 3 places around a 3/32 drill shank. What spec of steel
> do I need? and how do I heat treat it to put the spring into it once its
> been shaped/bent properly
On Tuesday 24 April 2018 21:22:00 Ed wrote:
> On 04/24/2018 06:53 PM, Gene Heskett wrote:
> > Greetings all;
> >
> > After 6+ months, gun farts has not shipped the magazine spring I
> > need to finish the conversion to a smaller cartridge in old meat in
> > the pot.
> >
> > This is a flat leaf, be
On Tuesday 24 April 2018 20:41:43 Kirk Wallace wrote:
> On 04/24/2018 04:53 PM, Gene Heskett wrote:
> > Greetings all;
> >
> > After 6+ months, gun farts has not shipped the magazine spring I
> > need to finish the conversion to a smaller cartridge in old meat in
> > the pot.
> >
> > This is a fla
On 04/24/2018 06:53 PM, Gene Heskett wrote:
Greetings all;
After 6+ months, gun farts has not shipped the magazine spring I need to
finish the conversion to a smaller cartridge in old meat in the pot.
This is a flat leaf, bent in the shape of a W. S/B nominally 1/2 to 5/8"
wide, folded at 3 pla
On 04/24/2018 04:53 PM, Gene Heskett wrote:
Greetings all;
After 6+ months, gun farts has not shipped the magazine spring I need to
finish the conversion to a smaller cartridge in old meat in the pot.
This is a flat leaf, bent in the shape of a W. S/B nominally 1/2 to 5/8"
wide, folded at 3 pla
5150 , do you have a kiln ? It will need bent, normalized . Treated then
tempered . It's the temper that will be most difficult . I would think
somewhere between 4-600 degrees at a 2 hour soak, exact temp will be trial
and error , so you should probably make several. A pid controlled melting
pot ma
Greetings all;
After 6+ months, gun farts has not shipped the magazine spring I need to
finish the conversion to a smaller cartridge in old meat in the pot.
This is a flat leaf, bent in the shape of a W. S/B nominally 1/2 to 5/8"
wide, folded at 3 places around a 3/32 drill shank. What spec of
10 matches
Mail list logo
