I have a D510 + PicoPSU system.
The PC shuts down as expected, but I would rather like it to power-off
the power supplies and monitor too.
Has anyone set up such a system?
I am thinking in terms of a relay controlled by the PicoPSU 5V or 12v
output to switch the 240Vac with a momentary switch in
Dang, I just googled PicoPSU and them things are tiny... If I replace my
power supply with one of those I could mount all kinds of stuff in the case.
John
On 1/18/2012 6:12 AM, andy pugh wrote:
I have a D510 + PicoPSU system.
The PC shuts down as expected, but I would rather like it to
I think the 12V relay is a good idea.
or as an alternative you may use this kind of device, with a
master/slave function :
http://www.priceminister.com/offer/buy/6668553/Bloc-Multiprise-Parafoudre-Parasurtenseur-Fonction-Master-Slave-Onduleur-Peripherique-d-alimentation.html
Le 18/01/2012
-
From: andy pugh bodge...@gmail.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Sent: Wed Jan 18 06:12:59 2012
Subject: [Emc-users] PC shutdown
I have a D510 + PicoPSU system.
The PC shuts down as expected, but I would rather like it to power-off
the power supplies
On 18 January 2012 13:28, James Louis james.lo...@gastechnology.org wrote:
My Servomill also runs on a D510MO and it is plugged into the master outlet
of a power strip called an Eco-strip
I don't think that will work for me, as the main thing I want to do is
turn of the 12V PSU which powers
They work well too.I have used a lot of them with zero failures over
the last several years.
Watch out as there is a chinese import clone that is being sold on Ebay
for not much less than the original.
Dave
On 1/18/2012 7:22 AM, John Thornton wrote:
Dang, I just googled PicoPSU and them
On 1/18/2012 9:00 AM, andy pugh wrote:
On 18 January 2012 13:28, James Louisjames.lo...@gastechnology.org wrote:
My Servomill also runs on a D510MO and it is plugged into the master outlet
of a power strip called an Eco-strip
I don't think that will work for me, as the main
andy pugh wrote:
I have a D510 + PicoPSU system.
The PC shuts down as expected, but I would rather like it to power-off
the power supplies and monitor too.
Has anyone set up such a system?
I am thinking in terms of a relay controlled by the PicoPSU 5V or 12v
output to switch the 240Vac with