> Hello!
> I have NetMos Technology PCI 9835 Multi I/O Controller with 1parallel an 2
> serial ports. When I configuring it to work in "out"-mode - it works fine,
> 12 outputs and 5 inputs(i have checked outs with multimeter and ins by
> wire
> with the 470 R ). When I configuring it to work in "in"-mode, in hal
> configuration window I see that pin names have changed, but it works
> exectly
> as in "out"-mode, e.g. pin 2 named pin-02-in - but it does not in, 0V
> between it and ground. What is the matter? May it be non-bidirection
> controller?
> 
>
Eugene

I had a similar problem over the weekend. I tried to assign an integrated
Parallel port 0 as cfg="0x378 in", and it would not be accepted. Eventually
I tried it as port 1, ie. "0xd000 out 0x378 in", with the d000 port a dummy
port, and it works!

Perhaps it will work for you as well.

Rudy


 

__________ Information from ESET Smart Security, version of virus signature
database 4903 (20100228) __________

The message was checked by ESET Smart Security.

http://www.eset.com
 


------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to