On Wed, 8 Jul 2020 at 19:03, Todd Zuercher wrote:
> No you would not have to do this in an inert atmosphere. The only difficult
> part would be collecting all the chips.
I would expect that the newly-cut surface is hermetically sealed to
the cutting edge until it isn't, and then it isn't
No you would not have to do this in an inert atmosphere. The only difficult
part would be collecting all the chips.
You'd simply weigh the un cut block and cutting tool before cutting. (you need
to include the tool because of material sticking to the tool and any tool
wear.) Then weigh the