On 2021-06-24 17:29, John Dammeyer wrote:
Anyway, for now the Shuttle is back on the MACH3 based CNC router
where it's currently in use carving up MDF so I can't borrow it back
for a few days.
I have the Shuttle (not the Express, but the other one with the extra
buttons etc).
It works a tr
> On Wed, 23 Jun 2021 at 03:08, John Dammeyer wrote:
>
> > shuttle: error opening /dev/hidraw0: Permission denied
> > shuttle: make sure you have read permission on /dev/hidraw0, read the
> > shuttle(1) manpage for more info
>
> I wonder if this is a setuid root thing?
>
> https://github.com/L
On Wed, 23 Jun 2021 at 03:08, John Dammeyer wrote:
> shuttle: error opening /dev/hidraw0: Permission denied
> shuttle: make sure you have read permission on /dev/hidraw0, read the
> shuttle(1) manpage for more info
I wonder if this is a setuid root thing?
https://github.com/LinuxCNC/linuxcnc/b
isans.com]
> Sent: June-22-21 7:20 PM
> To: 'Enhanced Machine Controller (EMC)'
> Subject: Re: [Emc-users] Shuttle Express
>
> Ah! Semi success. One more reboot of the Pi4.
> Then address the new error messages since this time it actually found the
> Shuttle Expr
Original Message-
> From: John Dammeyer [mailto:jo...@autoartisans.com]
> Sent: June-22-21 7:05 PM
> To: 'Enhanced Machine Controller (EMC)'
> Subject: [Emc-users] Shuttle Express
>
> I believe I've followed all the instructions on configuring for the Shuttle
I believe I've followed all the instructions on configuring for the Shuttle
Express on the Pi4 using LINUXCNC 2.8.1
Entering ls -al /dev/hidr* shows that with the shuttle not plugged in I have
hidraw1..hidraw3
Plug in the shuttle and hidraw0 shows up.
I've put source shuttle1_2020-07-10.hal int