On 05/10/2014 07:46 PM, Erik Friesen wrote:
> I would like my machine to not only wait for the spindle to come up to
> speed, but have it stop if the vfd has an error. I am reading the analog
> output from the vfd. I have looked at using Spindle-at-speed, but it only
> appears to check at the sta
On 11 May 2014 00:46, Erik Friesen wrote:
> I would like my machine to not only wait for the spindle to come up to
> speed, but have it stop if the vfd has an error.
You could probably use one of the axis.N.amp-fault-in pins.
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/
I would like my machine to not only wait for the spindle to come up to
speed, but have it stop if the vfd has an error. I am reading the analog
output from the vfd. I have looked at using Spindle-at-speed, but it only
appears to check at the start of the program. Is there a better way to do
this
