Greetings all; The spindle controller in a 7x10-12-14 is quite a bit different from the one in my mill, so my question is:
Can it be controlled by essentially the same controller (in this case a PMDX-106) as has worked so well on the mill? And if so, how hard is it in hal, to tie the encoder's output back into the speed logic in LinuxCNC? In a manner that looks like a constant SFM control even. Cheers, Gene -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) My web page: <http://coyoteden.dyndns-free.com:85/gene> I'll see you... on the dark side of the moon... -- Pink Floyd ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
