linuxcncrsh (src/emc/usr_intf/emcrsh.cc)
has been updated to a *limited* extent for the
master branch with joints-axes updates.
The extent of updates has primarily been to
maintain the scripts that are used in the runtests
suite of tests. These scripts are run on the
buildbot (for all supported o
On 17 August 2017 at 19:50, Eric H. Johnson wrote:
> I know this is a pre release, but I notice one significant difference. I blew
> the fuse on the 5V PS which powers the 7i43 and started up not realizing it
> had blown. Lcnc seems to lock up when it cannot talk to the 7i43. I was
> pretty su
Andy, Sebastian,
I know this is a pre release, but I notice one significant difference. I blew
the fuse on the 5V PS which powers the 7i43 and started up not realizing it had
blown. Lcnc seems to lock up when it cannot talk to the 7i43. I was pretty sure
in the previous release that it would gi
On 16 August 2017 at 23:05, Eric H. Johnson wrote:
> Odd thing that I have to check, I thought sure that I was using a 200k 7i43,
> but is being recognized as a 400k.
This was a very unusual problem caused by excessive hubris and someone
thinking that they could fix a bug in the 7i43 driver wit
Andy, Sebastian,
Thanks much, is working now. I will not update again until 2.8 is released.
Odd thing that I have to check, I thought sure that I was using a 200k 7i43,
but is being recognized as a 400k.
Done for today, will check tomorrow.
Thanks again,
Eric
On August 16, 2017 4:50:31 PM E
Sebastian,
Ok, thank you.
After playing with it a bit the lockup went away. It just either won't talk to
the parallel port, or tells me I have the wrong board (200k vs. 400k) although
I have one of each
Regards,
Eric
On August 16, 2017 4:50:31 PM EDT, Sebastian Kuzminsky wrote:
>On 08/16/2
On 08/16/2017 02:38 PM, Eric H. Johnson wrote:
Andy,
I am afraid I do not entirely follow. Does that mean that build is available,
or still rebuilding?
I am showing
1:2.8.0-pre1.3305.gde345856d
as both the installed and latest version. It still locks up when I try to use
the hostmot drivers.
Andy,
I am afraid I do not entirely follow. Does that mean that build is available,
or still rebuilding?
I am showing
1:2.8.0-pre1.3305.gde345856d
as both the installed and latest version. It still locks up when I try to use
the hostmot drivers.
Thanks,
Eric
On August 16, 2017 4:15:06 PM EDT
On 16 August 2017 at 21:09, andy pugh wrote:
>>>You want 1:2.8.0~pre1.3305.gde34585
If you want to watch it happening:
http://buildbot.linuxcnc.org/buildbot/waterfall
Your .deb is way over to the right.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the es
On 16 August 2017 at 20:43, Eric H. Johnson wrote:
> I have a 6d on the end of gde...,
Yes,
>>You want 1:2.8.0~pre1.3305.gde34585
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
— George F
Andy,
I have a 6d on the end of gde..., but otherwise the same. Still locking up when
using the hostmot drivers.
Sims work, as does parport | stepper-inch.
Thanks,
Eric
On August 16, 2017 3:32:48 PM EDT, andy pugh wrote:
>On 16 August 2017 at 20:17, Eric H. Johnson
>wrote:
>> Andy,
>>
>> Yes
On 16 August 2017 at 20:17, Eric H. Johnson wrote:
> Andy,
>
> Yes, I see 3305, so I am waiting for that to increment, right?
You want 1:2.8.0~pre1.3305.gde34585
(If I am reading things right)
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use o
Andy,
Yes, I see 3305, so I am waiting for that to increment, right?
Thanks,
Eric
On August 16, 2017 2:22:54 PM EDT, andy pugh wrote:
>On 16 August 2017 at 18:48, Eric H. Johnson
>wrote:
>> Sebastian,
>>
>> My sources.list file reads as follows:
>> deb http://buildbot.linuxcnc.org/ precise ma
It might be helpful if folks were more precise in
describing version names.
The git master branch VERSION file is 2.8.0~pre1
as recorded in this file:
https://github.com/LinuxCNC/linuxcnc/blob/master/VERSION
This VERSION is reported to stdout by the axis gui
and appears in the in the window bo
On 16 August 2017 at 18:48, Eric H. Johnson wrote:
> Sebastian,
>
> My sources.list file reads as follows:
> deb http://buildbot.linuxcnc.org/ precise master-rt
> deb-src http://buildbot.linuxcnc.org/ precise master-rt
This is master / 2.8 and that is what you want.
If you look in the Synaptic
Sebastian,
My sources.list file reads as follows:
deb http://buildbot.linuxcnc.org/ precise master-rt
deb-src http://buildbot.linuxcnc.org/ precise master-rt
deb http://linuxcnc.org/ precise base 2.7-rtai
deb-src http://linuxcnc.org/ precise base 2.7-rtai
The sources.list.d folder is empty. Apol
Andy, Sebastian,
I am unfortunately at the shop and can only get Internet through my phone. So I
am running half blind as far as Lcnc doc. Which version do I need to run that
supports gantry homing with opposing motors (added JOINT section to the ini
file).
It is that version I need to get bac
Andy,
I will wait.
Do I then just need to do an ap-get install?
Thanks,
Eric
On August 16, 2017 1:49:47 PM EDT, andy pugh wrote:
>On 16 August 2017 at 18:08, Eric H. Johnson
>wrote:
>
>> Which version introduced opposing motor gantry support? Was that 2.7,
>and because I had 2.7 pre installed
On 16 August 2017 at 18:08, Eric H. Johnson wrote:
> Which version introduced opposing motor gantry support? Was that 2.7, and
> because I had 2.7 pre installed I inadvertently upgraded to 2.8 pre?
It was master / 2.8.
You do need 2.8, your configs won't work with 2.7.
The buildbot is working
On 16 August 2017 at 17:30, Sebastian Kuzminsky wrote:
> That's terrible! What version of linuxcnc were you running? Was this an
> RTAI build?
This is probably my fault.
https://github.com/LinuxCNC/linuxcnc/commit/036bdd6eccc42ac8c878e54dce1343f58454f2f9
I thought that I had time to get some
Sebastian,
Which version introduced opposing motor gantry support? Was that 2.7, and
because I had 2.7 pre installed I inadvertently upgraded to 2.8 pre?
It is an RTAI build as I had the 7i43-small configuration working fine.
I will try what you say, I would just like confirmation that I am usi
On 08/16/2017 09:57 AM, Eric H. Johnson wrote:
All,
I installed linuxcnc 2.8.0-pre to Xubuntu 12.04, and was running for
some time. I seemed to have upgraded something I should not. The sim
configurations worked, but the default 7i43-small just locks up with
no error message. Nothing responds. C
All,
I installed linuxcnc 2.8.0-pre to Xubuntu 12.04, and was running for some time.
I seemed to have upgraded something I should not. The sim configurations
worked, but the default 7i43-small just locks up with no error message. Nothing
responds. Can only power off computer.
I tried apt-get r
23 matches
Mail list logo
